
Brake pad replacement in Cedar Rapids, IA
Brake pads wear down a little with every stop, and replacing them is part of the brake repair we do at the shop.
Call the shop, during shop hours, on the number below.
Key takeaways
Pad replacement sits within our brake repair, beside rotors and calipers.
Disc brake pads and drum brake shoes are both brake work we do.
How brake pads work, and how many a wheel has
On a disc brake, pressing the pedal makes the caliper squeeze a pair of pads against the rotor, one pad on each side of it. The friction slows the wheel, and the same friction is what wears the pad down. The rotor is the metal disc that turns with the wheel; the pads are the blocks that grip it. Both wear, but pads wear faster.
Each wheel with a disc brake has one pair of pads. A wheel with a drum brake has shoes instead.
Choosing brake pads: best, quietest, least dusty, longest-lasting and best for towing
No pad is best at everything, because pad material trades one quality for another and the right choice depends on the vehicle and how it is driven.
- Ceramic pads tend to run quiet and leave the least dust on the wheels, which also makes them the pads that squeak the least.
- Semi-metallic pads tend to suit heavier loads and towing, and to give strong stopping power when the brakes get hot, at the cost of more noise and dust.
- Harder pad materials tend to last longer than softer ones, while softer ones tend to be quieter and kinder to the rotor.
- For drilled or slotted rotors, the pad is chosen to suit the rotor and the way the car is used, and the rotor maker's guidance is the place to start.
Front pads and rear pads: which matter more and which wear out first
Both sets matter, because they work together to stop the car. The front brakes do more of the stopping, since weight shifts forward when you brake, so front pads usually wear out first. Rear pads wear more slowly but need to be in good condition too.
Brake pads versus drums
Pads belong to disc brakes: the caliper presses a pair of pads against a rotor. Drum brakes use brake shoes instead: curved shoes press outward against the inside of a drum. Many cars have discs at the front and drums at the back, but it varies by vehicle. We repair both kinds, brake pads and brake shoes and drums.
Areas we serve
In Cedar Rapids
- Cedar Rapids, where the shop is.
- Downtown, Cedar Rapids.
- 1st Avenue, Cedar Rapids.
Around Cedar Rapids
- Hiawatha: about 5.1 road miles from the shop.
- Fairfax: about 7.1 road miles from the shop.
- Marion: about 7.3 road miles from the shop.
- Ely: about 9.9 road miles from the shop.
- Shueyville: about 10.1 road miles from the shop.
- Swisher: about 10.4 road miles from the shop.
- Walford: about 11.0 road miles from the shop.
- Atkins: about 12.7 road miles from the shop.
- Solon: about 16.9 road miles from the shop.
- Mount Vernon: about 17.1 road miles from the shop.
- Center Point: about 18.0 road miles from the shop.
- North Liberty: about 18.2 road miles from the shop.
- Lisbon: about 18.7 road miles from the shop.
- Tiffin: about 20.2 road miles from the shop.
- Central City: about 21.9 road miles from the shop.
- Urbana: about 23.0 road miles from the shop.
- Coralville: about 23.8 road miles from the shop.
- Anamosa: about 25.8 road miles from the shop.
- Mechanicsville: about 25.8 road miles from the shop.
- Iowa City: about 27.3 road miles from the shop.
- Marengo: about 31.3 road miles from the shop.
- Stanwood: about 31.5 road miles from the shop.
- Vinton: about 34.0 road miles from the shop.
- West Branch: about 36.3 road miles from the shop.
Why Arcadia Tire Co.
- 40 years of automotive experienceBetween the shop workers
- In business since 2018
- Open Saturdays 1pm-5pm
- 30-day guarantee
- Wheelchair-accessible entrance and parking lot
Frequently asked questions
- Where can I get brake pads replaced near me?
- Brake pad replacement is part of our brake repair at the shop, right outside downtown Cedar Rapids, half a block from Highway 380. The address is 507 1st Ave SW.
- How much does brake pad replacement cost?
- The cost depends on the vehicle, the kind of pad, and whether the rotors and other brake parts need work at the same time. The price is not on this site. Call (319) 200-2002 and ask.
- When should brake pads be replaced?
- Pads are due when the friction material has worn thin, before it wears down to the metal backing. The usual signs are a squeal or grinding when you brake, a pedal that feels different, and the car taking longer to stop. How thin is too thin depends on the pad and the vehicle, so this page gives no measurement.
- Why do brake pads start squeaking?
- Many pads carry a small metal wear tab that squeals on purpose once the pad has worn down to near its end. Squeaking can also come from brake dust, moisture, glazed pads or pads that do not sit cleanly in their bracket, so a squeak is a reason to look at the pads, not proof that they are worn out.
- How should brake pads look?
- A pad in good shape has an even layer of friction material across its face. A worn pad is thin, may be worn more at one end than the other, and may be cracked, or shiny and glazed. A bare metal backing means the friction material is gone.
- When do brake pads and rotors need to be replaced together?
- Pads wear faster than rotors, so pads are often replaced more than once for each set of rotors. Rotors are replaced with the pads when they are worn thin, grooved, warped or badly rusted, because new pads bed in best against a smooth, even rotor.
- Are more expensive brake pads better?
- Not always. A higher price can mean a different pad material or a premium line, but the better pad is the one that suits the vehicle and how it is driven, and a pad that is wrong for the use is not better at any price.
- Which brake pads are made in the USA?
- Where a pad is made depends on the brand and the product line, and some brands make pads in more than one country. This page does not say where any brand's pads are made.

Need tires or a repair in Cedar Rapids?
Call (319) 200-2002, Mon-Fri 10am-6pm and Sat 1pm-5pm, or request an estimate online.
