507 1st Ave SW, Cedar Rapids, IA 52405Shop hours: Mon-Fri 10am-6pm, Sat 1pm-5pm, Sun closed24-hour mobile tire & towingDirections
Arcadia Tire Co.Call (319) 200-2002
Brake rotor and suspension with the wheel removed

Brake rotor replacement in Cedar Rapids, IA

Brake rotors are the metal discs behind each wheel that the pads grip, and replacing them is part of our brake repair work, along with pads and calipers.

Call the shop, during shop hours, on the number below.

Key takeaways

  • Rotor replacement is part of our brake repair.

  • Bosch is among the brake-part brands we use or sell.

What brake rotors are, what they are made of and how they look

A brake rotor, also called a brake disc, is a flat metal disc that turns with the wheel. When you press the pedal the caliper squeezes the pads against both faces of it, and the friction slows the wheel. Most rotors are made of cast iron.

A rotor looks like a wide round plate with a raised hat in the middle that fits over the hub. On a good rotor the faces the pads grip are smooth and evenly shiny. Some rotors have holes drilled through them or slots cut in their faces.

Choosing brake rotors: which discs fit, which are best and which brand

The right rotor is the one made for your vehicle's make, model and brake setup, and for how the car is used, so no one rotor is best for every car. Rotors and pads are chosen as a pair, since each wears against the other.

The brake-part brands we use or sell are NAPA, APSG, AutoZone, Bosch, Akebono, Brembo, ATE, Centric, Raybestos and Wilwood. We do not rank them, and this page states no country of origin for any brand's rotors.

Areas we serve

In Cedar Rapids

Around Cedar Rapids

  • Hiawatha: about 5.1 road miles from the shop.
  • Fairfax: about 7.1 road miles from the shop.
  • Marion: about 7.3 road miles from the shop.
  • Ely: about 9.9 road miles from the shop.
  • Shueyville: about 10.1 road miles from the shop.
  • Swisher: about 10.4 road miles from the shop.
  • Walford: about 11.0 road miles from the shop.
  • Atkins: about 12.7 road miles from the shop.
  • Solon: about 16.9 road miles from the shop.
  • Mount Vernon: about 17.1 road miles from the shop.
  • Center Point: about 18.0 road miles from the shop.
  • North Liberty: about 18.2 road miles from the shop.
  • Lisbon: about 18.7 road miles from the shop.
  • Tiffin: about 20.2 road miles from the shop.
  • Central City: about 21.9 road miles from the shop.
  • Urbana: about 23.0 road miles from the shop.
  • Coralville: about 23.8 road miles from the shop.
  • Anamosa: about 25.8 road miles from the shop.
  • Mechanicsville: about 25.8 road miles from the shop.
  • Iowa City: about 27.3 road miles from the shop.
  • Marengo: about 31.3 road miles from the shop.
  • Stanwood: about 31.5 road miles from the shop.
  • Vinton: about 34.0 road miles from the shop.
  • West Branch: about 36.3 road miles from the shop.

Why Arcadia Tire Co.

  • 4.7 stars from 527 Google reviewsGoogle's rating, over reviews from 2018 to 2026
  • 40 years of automotive experienceBetween the shop workers
  • In business since 2018
  • Open Saturdays 1pm-5pm
  • 30-day guarantee
  • Wheelchair-accessible entrance and parking lot

Frequently asked questions

Where can I get brake rotors replaced near me?
Brake rotors are replaced at the shop, right outside downtown Cedar Rapids, half a block from Highway 380, with the pads and calipers when those need work too. The address is 507 1st Ave SW.
Where can I find Bosch brake rotors near me?
Bosch is one of the brake-part brands we use or sell. Replacing brake rotors is part of our brake repair.
How much does brake rotor replacement cost?
The cost depends on the vehicle, the rotors it takes, and whether pads and other brake parts are replaced at the same time. The price is not on this site. Call (319) 200-2002 and ask.
What are the signs of warped brake rotors?
A pulsing brake pedal or a steering wheel that shakes when you brake are the usual signs. You may also hear a squeal or feel the car stop unevenly.
What causes brake rotors to warp?
Mostly heat and uneven wear. Hard or repeated braking heats the rotor, and pad material can build up unevenly on its face, so the surface the pads grip is no longer flat.
Are rusty brake rotors a problem?
A thin layer of surface rust after rain, or after the car sits, is common and usually wears off in the first few stops. Rust that stays, pits the face or eats into the rotor's edges is a sign the rotor may need replacing. Cast iron rotors rust once they get wet, whatever the brand; some carry a coating that slows rust on the parts the pads do not touch.
When should brake rotors be replaced, and how long do they last?
Rotors are replaced when they are worn thin, grooved, scored, warped or badly rusted, or when they make the pedal pulse. There is no set life: it depends on the rotor, the pads, the vehicle and how it is driven, and hard braking, towing and hilly roads wear rotors faster. Rotors wear more slowly than pads, so they are often replaced together with new pads, which bed in best against a smooth rotor.
Do new brake rotors need to be broken in?
Some rotor and pad makers call for a break-in, usually a run of moderate stops so the pad material spreads evenly over the new rotor. Their instructions differ, so the maker's guidance for the parts fitted is the one to follow.
Enhanced view of the Arcadia Tire storefront at dusk

Need tires or a repair in Cedar Rapids?

Call (319) 200-2002, Mon-Fri 10am-6pm and Sat 1pm-5pm, or request an estimate online.

Call (319) 200-2002